LocalDeck: ESPHome update failed

AtmanActive

Hi,
I was just unpacking my brand new LocalDeck and was following the instructions on this page.

As soon as I finished WiFi setup via Captive Portal, my Home Assistant discovered the device via ESPHome integration, even though at that time I didn’t have the add-on installed. Then, watching the video, I realized I need to add the ESPHome add-on as well. But, after installing the add-on, my LocalDeck wasn’t showing up in the add-on at all. Then I deleted the entry from the integration, restarted LocalDeck and then the add-on discovered it. However, when performing the update, the update failed.

The LocalDeck Configurator add-on seems to be working fine.

There is this confusion where the video talks about ESPHome add-on, while, in my Home Assistant’s add-on store there are three add-ons to choose from: ESPHome Device Builder (dev), ESPHome Device Compiler and ESPHome Device Compiler (beta). So, which one should I use?

Anyway, I went with ESPHome Device Compiler add-on, and here is the update-failed log:

INFO ESPHome 2024.11.3
INFO Reading configuration /config/esphome/localdeck-fce9ac.yaml...
WARNING GPIO8 is a strapping PIN and should only be used for I/O with care.
Attaching external pullup/down resistors to strapping pins can cause unexpected failures.
See https://esphome.io/guides/faq.html#why-am-i-getting-a-warning-about-strapping-pins
INFO Generating C++ source...
INFO Compiling app...
Processing localdeck-fce9ac (board: esp32-c3-devkitm-1; framework: espidf; platform: platformio/espressif32@5.4.0)
--------------------------------------------------------------------------------
HARDWARE: ESP32C3 160MHz, 320KB RAM, 4MB Flash
 - framework-espidf @ 3.40408.0 (4.4.8) 
 - tool-cmake @ 3.16.4 
 - tool-ninja @ 1.7.1 
 - toolchain-esp32ulp @ 2.35.0-20220830 
 - toolchain-riscv32-esp @ 8.4.0+2021r2-patch5
Reading CMake configuration...
Dependency Graph
|-- noise-c @ 0.1.6
|-- ArduinoJson @ 6.18.5
|-- Improv @ 1.2.4
Compiling .pioenvs/localdeck-fce9ac/src/esphome/components/api/api_frame_helper.o
Compiling .pioenvs/localdeck-fce9ac/src/esphome/components/api/api_pb2.o
Compiling .pioenvs/localdeck-fce9ac/src/esphome/components/api/api_server.o
Compiling .pioenvs/localdeck-fce9ac/src/esphome/components/api/list_entities.o
riscv32-esp-elf-g++: fatal error: Killed signal terminated program cc1plus
compilation terminated.
*** [.pioenvs/localdeck-fce9ac/src/esphome/components/api/api_server.o] Error 1
riscv32-esp-elf-g++: fatal error: Killed signal terminated program cc1plus
compilation terminated.
*** [.pioenvs/localdeck-fce9ac/src/esphome/components/api/api_frame_helper.o] Error 1
riscv32-esp-elf-g++: fatal error: Killed signal terminated program cc1plus
compilation terminated.
*** [.pioenvs/localdeck-fce9ac/src/esphome/components/api/list_entities.o] Error 1
riscv32-esp-elf-g++: fatal error: Killed signal terminated program cc1plus
compilation terminated.
*** [.pioenvs/localdeck-fce9ac/src/esphome/components/api/api_pb2.o] Error 1
========================= [FAILED] Took 18.52 seconds =========================

Please advise.

Thanks.

AtmanActive

INFO ESPHome 2025.1.0-dev
INFO Reading configuration /config/esphome/localdeck-fce9ac.yaml...
WARNING GPIO8 is a strapping PIN and should only be used for I/O with care.
Attaching external pullup/down resistors to strapping pins can cause unexpected failures.
See https://esphome.io/guides/faq.html#why-am-i-getting-a-warning-about-strapping-pins
INFO Generating C++ source...
INFO Core config, version or integrations changed, cleaning build files...
INFO Updating https://github.com/espressif/esp-protocols.git@mdns-v1.3.2
INFO Compiling app...
Processing localdeck-fce9ac (board: esp32-c3-devkitm-1; framework: espidf; platform: https://github.com/pioarduino/platform-espressif32.git#51.03.07)
--------------------------------------------------------------------------------
Platform Manager: Installing git+https://github.com/pioarduino/platform-espressif32.git#51.03.07
INFO Installing git+https://github.com/pioarduino/platform-espressif32.git#51.03.07
git version 2.39.5
Cloning into '/data/cache/platformio/cache/tmp/pkg-installing-mcup717a'...
Note: switching to 'ec17486ffa451374e108b72be07e9c8fa83338e8'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:

  git switch -c <new-branch-name>

Or undo this operation with:

  git switch -

Turn off this advice by setting config variable advice.detachedHead to false

Platform Manager: espressif32@51.3.6+sha.ec17486 has been installed!
INFO espressif32@51.3.6+sha.ec17486 has been installed!
Tool Manager: Installing https://github.com/pioarduino/esp-idf/releases/download/v5.1.5/esp-idf-v5.1.5.zip
INFO Installing https://github.com/pioarduino/esp-idf/releases/download/v5.1.5/esp-idf-v5.1.5.zip
Downloading  [####################################]  100%          
Unpacking  [####################################]  100%          
Tool Manager: framework-espidf@3.50105.0 has been installed!
INFO framework-espidf@3.50105.0 has been installed!
Tool Manager: Installing espressif/toolchain-riscv32-esp @ 12.2.0+20230208
INFO Installing espressif/toolchain-riscv32-esp @ 12.2.0+20230208
Downloading  [####################################]  100%          
Unpacking  [####################################]  100%          
Tool Manager: toolchain-riscv32-esp@12.2.0+20230208 has been installed!
INFO toolchain-riscv32-esp@12.2.0+20230208 has been installed!
Tool Manager: Installing espressif/tool-xtensa-esp-elf-gdb @ ~12.1.0
INFO Installing espressif/tool-xtensa-esp-elf-gdb @ ~12.1.0
Downloading  [####################################]  100%
Unpacking  [####################################]  100%          
Tool Manager: tool-xtensa-esp-elf-gdb@12.1.0+20221002 has been installed!
INFO tool-xtensa-esp-elf-gdb@12.1.0+20221002 has been installed!
Tool Manager: Installing espressif/tool-riscv32-esp-elf-gdb @ ~12.1.0
INFO Installing espressif/tool-riscv32-esp-elf-gdb @ ~12.1.0
Downloading  [####################################]  100%
Unpacking  [####################################]  100%          
Tool Manager: tool-riscv32-esp-elf-gdb@12.1.0+20221002 has been installed!
INFO tool-riscv32-esp-elf-gdb@12.1.0+20221002 has been installed!
Tool Manager: Installing https://github.com/pioarduino/esptool/releases/download/v4.8.1.1/esptool.zip
INFO Installing https://github.com/pioarduino/esptool/releases/download/v4.8.1.1/esptool.zip
Downloading  [####################################]  100%
Unpacking  [####################################]  100%
Tool Manager: tool-esptoolpy@4.8.1 has been installed!
INFO tool-esptoolpy@4.8.1 has been installed!
Tool Manager: Installing tasmota/tool-mklittlefs @ ^3.2.0
INFO Installing tasmota/tool-mklittlefs @ ^3.2.0
Downloading  [####################################]  100%
Unpacking  [####################################]  100%
Tool Manager: tool-mklittlefs@3.2.0 has been installed!
INFO tool-mklittlefs@3.2.0 has been installed!
Tool Manager: Installing platformio/tool-cmake @ ~3.21.0
INFO Installing platformio/tool-cmake @ ~3.21.0
Downloading  [####################################]  100%          
Unpacking  [####################################]  100%          
Tool Manager: tool-cmake@3.21.3 has been installed!
INFO tool-cmake@3.21.3 has been installed!
Tool Manager: Installing platformio/tool-ninja @ ^1.7.0
INFO Installing platformio/tool-ninja @ ^1.7.0
Downloading  [####################################]  100%
Unpacking  [####################################]  100%
Tool Manager: tool-ninja@1.7.1 has been installed!
INFO tool-ninja@1.7.1 has been installed!
Tool Manager: Installing espressif/toolchain-esp32ulp @ 2.35.0-20220830
INFO Installing espressif/toolchain-esp32ulp @ 2.35.0-20220830
Downloading  [####################################]  100%
Unpacking  [####################################]  100%
Tool Manager: toolchain-esp32ulp@2.35.0-20220830 has been installed!
INFO toolchain-esp32ulp@2.35.0-20220830 has been installed!
Tool Manager: Installing platformio/tool-scons @ ~4.40801.0
INFO Installing platformio/tool-scons @ ~4.40801.0
Downloading  [####################################]  100%
Unpacking  [####################################]  100%
Tool Manager: tool-scons@4.40801.0 has been installed!
INFO tool-scons@4.40801.0 has been installed!
Library Manager: Installing esphome/noise-c @ 0.1.6
INFO Installing esphome/noise-c @ 0.1.6
Downloading  [####################################]  100%
Unpacking  [####################################]  100%
Library Manager: noise-c@0.1.6 has been installed!
INFO noise-c@0.1.6 has been installed!
Library Manager: Resolving dependencies...
INFO Resolving dependencies...
Library Manager: Installing esphome/libsodium @ 1.10018.4
INFO Installing esphome/libsodium @ 1.10018.4
Downloading  [####################################]  100%
Unpacking  [####################################]  100%
Library Manager: libsodium@1.10018.4 has been installed!
INFO libsodium@1.10018.4 has been installed!
Library Manager: Installing bblanchon/ArduinoJson @ 6.18.5
INFO Installing bblanchon/ArduinoJson @ 6.18.5
Downloading  [####################################]  100%
Unpacking  [####################################]  100%
Library Manager: ArduinoJson@6.18.5 has been installed!
INFO ArduinoJson@6.18.5 has been installed!
Library Manager: Installing improv/Improv @ 1.2.4
INFO Installing improv/Improv @ 1.2.4
Downloading  [####################################]  100%
Unpacking  [####################################]  100%
Library Manager: Improv@1.2.4 has been installed!
INFO Improv@1.2.4 has been installed!
HARDWARE: ESP32C3 160MHz, 320KB RAM, 4MB Flash
 - framework-espidf @ 3.50105.0 (5.1.5) 
 - tool-cmake @ 3.21.3 
 - tool-esptoolpy @ 4.8.1 
 - tool-mklittlefs @ 3.2.0 
 - tool-ninja @ 1.7.1 
 - tool-riscv32-esp-elf-gdb @ 12.1.0+20221002 
 - tool-xtensa-esp-elf-gdb @ 12.1.0+20221002 
 - toolchain-esp32ulp @ 2.35.0-20220830 
 - toolchain-riscv32-esp @ 12.2.0+20230208
Creating a new virtual environment for IDF Python dependencies
Installing ESP-IDF's Python dependencies
Collecting wheel>=0.35.1
  Downloading wheel-0.45.1-py3-none-any.whl (72 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 72.5/72.5 kB 2.1 MB/s eta 0:00:00
Collecting urllib3<2
  Downloading urllib3-1.26.20-py2.py3-none-any.whl (144 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 144.2/144.2 kB 10.0 MB/s eta 0:00:00
Collecting cryptography~=41.0.1
  Downloading cryptography-41.0.7-cp37-abi3-manylinux_2_28_x86_64.whl (4.4 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.4/4.4 MB 20.4 MB/s eta 0:00:00
Collecting future>=0.18.3
  Downloading future-1.0.0-py3-none-any.whl (491 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 491.3/491.3 kB 69.1 MB/s eta 0:00:00
Collecting pyparsing<4,>=3.1.0
  Downloading pyparsing-3.2.0-py3-none-any.whl (106 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 106.9/106.9 kB 91.2 MB/s eta 0:00:00
Collecting kconfiglib~=14.1.0
  Downloading kconfiglib-14.1.0-py2.py3-none-any.whl (145 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 145.9/145.9 kB 98.5 MB/s eta 0:00:00
Collecting idf-component-manager~=2.0.1
  Downloading idf_component_manager-2.0.4-py3-none-any.whl (151 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 151.3/151.3 kB 100.8 MB/s eta 0:00:00
Collecting esp-idf-kconfig<2.0.0,>=1.4.2
  Downloading esp_idf_kconfig-1.5.0-py3-none-any.whl (44 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 44.9/44.9 kB 88.8 MB/s eta 0:00:00
Collecting cffi>=1.12
  Downloading cffi-1.17.1-cp311-cp311-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (467 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 467.2/467.2 kB 35.9 MB/s eta 0:00:00
Collecting click
  Downloading click-8.1.7-py3-none-any.whl (97 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 97.9/97.9 kB 64.9 MB/s eta 0:00:00
Collecting colorama
  Downloading colorama-0.4.6-py2.py3-none-any.whl (25 kB)
Collecting pyyaml
  Downloading PyYAML-6.0.2-cp311-cp311-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (762 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 763.0/763.0 kB 68.2 MB/s eta 0:00:00
Collecting requests
  Downloading requests-2.32.3-py3-none-any.whl (64 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 64.9/64.9 kB 118.5 MB/s eta 0:00:00
Collecting requests-file
  Downloading requests_file-2.1.0-py2.py3-none-any.whl (4.2 kB)
Collecting requests-toolbelt
  Downloading requests_toolbelt-1.0.0-py2.py3-none-any.whl (54 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 54.5/54.5 kB 56.5 MB/s eta 0:00:00
Collecting tqdm
  Downloading tqdm-4.67.1-py3-none-any.whl (78 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 78.5/78.5 kB 42.0 MB/s eta 0:00:00
Collecting jsonref
  Downloading jsonref-1.1.0-py3-none-any.whl (9.4 kB)
Collecting pydantic
  Downloading pydantic-2.10.3-py3-none-any.whl (456 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 457.0/457.0 kB 80.2 MB/s eta 0:00:00
Collecting pydantic-core
  Downloading pydantic_core-2.27.1-cp311-cp311-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (2.1 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.1/2.1 MB 45.0 MB/s eta 0:00:00
Collecting pydantic-settings
  Downloading pydantic_settings-2.6.1-py3-none-any.whl (28 kB)
Collecting typing-extensions
  Downloading typing_extensions-4.12.2-py3-none-any.whl (37 kB)
Collecting pycparser
  Downloading pycparser-2.22-py3-none-any.whl (117 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 117.6/117.6 kB 70.0 MB/s eta 0:00:00
Collecting annotated-types>=0.6.0
  Downloading annotated_types-0.7.0-py3-none-any.whl (13 kB)
Collecting python-dotenv>=0.21.0
  Downloading python_dotenv-1.0.1-py3-none-any.whl (19 kB)
Collecting charset-normalizer<4,>=2
  Downloading charset_normalizer-3.4.0-cp311-cp311-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (142 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 142.6/142.6 kB 91.5 MB/s eta 0:00:00
Collecting idna<4,>=2.5
  Downloading idna-3.10-py3-none-any.whl (70 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 70.4/70.4 kB 99.2 MB/s eta 0:00:00
Collecting certifi>=2017.4.17
  Downloading certifi-2024.8.30-py3-none-any.whl (167 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 167.3/167.3 kB 85.3 MB/s eta 0:00:00
Installing collected packages: wheel, urllib3, typing-extensions, tqdm, pyyaml, python-dotenv, pyparsing, pycparser, kconfiglib, jsonref, idna, future, colorama, click, charset-normalizer, certifi, annotated-types, requests, pydantic-core, esp-idf-kconfig, cffi, requests-toolbelt, requests-file, pydantic, cryptography, pydantic-settings, idf-component-manager
Successfully installed annotated-types-0.7.0 certifi-2024.8.30 cffi-1.17.1 charset-normalizer-3.4.0 click-8.1.7 colorama-0.4.6 cryptography-41.0.7 esp-idf-kconfig-1.5.0 future-1.0.0 idf-component-manager-2.0.4 idna-3.10 jsonref-1.1.0 kconfiglib-14.1.0 pycparser-2.22 pydantic-2.10.3 pydantic-core-2.27.1 pydantic-settings-2.6.1 pyparsing-3.2.0 python-dotenv-1.0.1 pyyaml-6.0.2 requests-2.32.3 requests-file-2.1.0 requests-toolbelt-1.0.0 tqdm-4.67.1 typing-extensions-4.12.2 urllib3-1.26.20 wheel-0.45.1
Reading CMake configuration...
Generating assembly for certificate bundle...
Warning! Flash memory size mismatch detected. Expected 4MB, found 2MB!
Please select a proper value in your `sdkconfig.defaults` or via the `menuconfig` target!
Dependency Graph
|-- noise-c @ 0.1.6
|-- ArduinoJson @ 6.18.5
|-- Improv @ 1.2.4
Compiling .pioenvs/localdeck-fce9ac/src/esphome/components/api/api_connection.cpp.o
Compiling .pioenvs/localdeck-fce9ac/src/esphome/components/api/api_frame_helper.cpp.o
Compiling .pioenvs/localdeck-fce9ac/src/esphome/components/api/api_pb2.cpp.o
Compiling .pioenvs/localdeck-fce9ac/src/esphome/components/api/api_pb2_service.cpp.o
riscv32-esp-elf-g++: fatal error: Killed signal terminated program cc1plus
compilation terminated.
*** [.pioenvs/localdeck-fce9ac/src/esphome/components/api/api_connection.cpp.o] Error 1
riscv32-esp-elf-g++: fatal error: Killed signal terminated program cc1plus
compilation terminated.
*** [.pioenvs/localdeck-fce9ac/src/esphome/components/api/api_frame_helper.cpp.o] Error 1
riscv32-esp-elf-g++: fatal error: Killed signal terminated program cc1plus
compilation terminated.
*** [.pioenvs/localdeck-fce9ac/src/esphome/components/api/api_pb2.cpp.o] Error 1
========================= [FAILED] Took 154.24 seconds =========================`

AtmanActive

OK, now I’m stuck completely.

Now my integration refuses to add the device with the error: Can’t connect to ESP. Please make sure your YAML file contains an ‘api:’ line.

AtmanActive

Tried again, this time it worked.

AtmanActive

OK, the device is useless to me now. Nothing is working as expected.

Please help.

Thanks.

archie

Hi @AtmanActive ,

Sorry for the delayed response.

You mentioned in your second to last post that you had got things working, and then in your last post that it is not working again. Could you please confirm if you are still having difficulty and what state the local deck is currently in. I.e, is it turning on at all, is it connecting to your network, is it visible in any state in home assistant?

AtmanActive

Hi @archie ,

Thank you for your reply.

I apologize for not being clearer.

The current state of things here is:

when I press a hardware button on the LocalDeck, the LED blinks for a moment
in my Home Assistant ESPHome integration, I can see the LocalDeck showing firmware 0.0.1 (ESPHome 2024.6.1) and all of the hardware button and hardware LED controls. If I click on any of the LED controls, the hardware LED does come up on the LocalDeck
in my Home Assistant ESPHome Builder (dev) add-on, I do see the device, but if I click on [UPDATE ALL] button, I do get the error(s) I posted earlier.
in my Home Assistant LocalDeck Configurator add-on, I do see the device, but when I click [SAVE] I get the message: “Saving… Your changes have been saved, please go to ESPHome to install!”, but when I go to ESPHome Compiler add-on and click [INSTALL], it fails with the text I pasted in my previous post.

Hence, I can’t use LocalDeck Configurator add-on and I can’t use my LocalDeck as inteded.

Please help.

Thanks.

AtmanActive

Here is the fail log again:

INFO ESPHome 2024.12.1
INFO Reading configuration /config/esphome/localdeck-fce9ac.yaml…
WARNING GPIO8 is a strapping PIN and should only be used for I/O with care.
Attaching external pullup/down resistors to strapping pins can cause unexpected failures.
See https://esphome.io/guides/faq.html#why-am-i-getting-a-warning-about-strapping-pins
INFO Generating C++ source…
INFO Cloning https://github.com/espressif/esp-protocols.git@mdns-v1.3.2
INFO Fetching mdns-v1.3.2
INFO Compiling app…

Processing localdeck-fce9ac (board: esp32-c3-devkitm-1; framework: espidf; platform: https://github.com/pioarduino/platform-espressif32.git#51.03.07)

Platform Manager: Installing git+https://github.com/pioarduino/platform-espressif32.git#51.03.07
INFO Installing git+https://github.com/pioarduino/platform-espressif32.git#51.03.07
git version 2.39.5
Cloning into ‘/data/cache/platformio/cache/tmp/pkg-installing-8lrwajti’…
Note: switching to ‘ec17486ffa451374e108b72be07e9c8fa83338e8’.

You are in ‘detached HEAD’ state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:

git switch -c <new-branch-name>

Or undo this operation with:

git switch -

Turn off this advice by setting config variable advice.detachedHead to false

Platform Manager: espressif32@51.3.6+sha.ec17486 has been installed!
INFO espressif32@51.3.6+sha.ec17486 has been installed!
Tool Manager: Installing https://github.com/pioarduino/esp-idf/releases/download/v5.1.5/esp-idf-v5.1.5.zip
INFO Installing https://github.com/pioarduino/esp-idf/releases/download/v5.1.5/esp-idf-v5.1.5.zip
Downloading [####################################] 100%
Unpacking [####################################] 100%
Tool Manager: framework-espidf@3.50105.0 has been installed!
INFO framework-espidf@3.50105.0 has been installed!
Tool Manager: Installing espressif/toolchain-riscv32-esp @ 12.2.0+20230208
INFO Installing espressif/toolchain-riscv32-esp @ 12.2.0+20230208
Downloading [####################################] 100%
Unpacking [####################################] 100%
Tool Manager: toolchain-riscv32-esp@12.2.0+20230208 has been installed!
INFO toolchain-riscv32-esp@12.2.0+20230208 has been installed!
Tool Manager: Installing espressif/tool-xtensa-esp-elf-gdb @ ₁₂.1.0
INFO Installing espressif/tool-xtensa-esp-elf-gdb @ ₁₂.1.0
Downloading [####################################] 100%
Unpacking [####################################] 100%
Tool Manager: tool-xtensa-esp-elf-gdb@12.1.0+20221002 has been installed!
INFO tool-xtensa-esp-elf-gdb@12.1.0+20221002 has been installed!
Tool Manager: Installing espressif/tool-riscv32-esp-elf-gdb @ ₁₂.1.0
INFO Installing espressif/tool-riscv32-esp-elf-gdb @ ₁₂.1.0
Downloading [####################################] 100%
Unpacking [####################################] 100%
Tool Manager: tool-riscv32-esp-elf-gdb@12.1.0+20221002 has been installed!
INFO tool-riscv32-esp-elf-gdb@12.1.0+20221002 has been installed!
Tool Manager: Installing https://github.com/pioarduino/esptool/releases/download/v4.8.1.1/esptool.zip
INFO Installing https://github.com/pioarduino/esptool/releases/download/v4.8.1.1/esptool.zip
Downloading [####################################] 100%
Unpacking [####################################] 100%
Tool Manager: tool-esptoolpy@4.8.1 has been installed!
INFO tool-esptoolpy@4.8.1 has been installed!
Tool Manager: Installing tasmota/tool-mklittlefs @ ³.2.0
INFO Installing tasmota/tool-mklittlefs @ ³.2.0
Downloading [####################################] 100%
Unpacking [####################################] 100%
Tool Manager: tool-mklittlefs@3.2.0 has been installed!
INFO tool-mklittlefs@3.2.0 has been installed!
Tool Manager: Installing platformio/tool-cmake @ ₃.21.0
INFO Installing platformio/tool-cmake @ ₃.21.0
Downloading [####################################] 100%
Unpacking [####################################] 100%
Tool Manager: tool-cmake@3.21.3 has been installed!
INFO tool-cmake@3.21.3 has been installed!
HARDWARE: ESP32C3 160MHz, 320KB RAM, 4MB Flash

framework-espidf @ 3.50105.0 (5.1.5)
tool-cmake @ 3.21.3
tool-esptoolpy @ 4.8.1
tool-mklittlefs @ 3.2.0
tool-ninja @ 1.7.1
tool-riscv32-esp-elf-gdb @ 12.1.0+20221002
tool-xtensa-esp-elf-gdb @ 12.1.0+20221002
toolchain-esp32ulp @ 2.35.0-20220830
toolchain-riscv32-esp @ 12.2.0+20230208
Creating a new virtual environment for IDF Python dependencies
Installing ESP-IDF’s Python dependencies
Collecting wheel>=0.35.1
Downloading wheel-0.45.1-py3-none-any.whl (72 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 72.5/72.5 kB 2.6 MB/s eta 0:00:00
Collecting urllib3<2
Downloading urllib3-1.26.20-py2.py3-none-any.whl (144 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 144.2/144.2 kB 10.4 MB/s eta 0:00:00
Collecting cryptography~=41.0.1
Downloading cryptography-41.0.7-cp37-abi3-manylinux_2_28_x86_64.whl (4.4 MB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.4/4.4 MB 49.1 MB/s eta 0:00:00
Collecting future>=0.18.3
Downloading future-1.0.0-py3-none-any.whl (491 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 491.3/491.3 kB 99.7 MB/s eta 0:00:00
Collecting pyparsing<4,>=3.1.0
Downloading pyparsing-3.2.0-py3-none-any.whl (106 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 106.9/106.9 kB 84.9 MB/s eta 0:00:00
Collecting kconfiglib~=14.1.0
Downloading kconfiglib-14.1.0-py2.py3-none-any.whl (145 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 145.9/145.9 kB 103.2 MB/s eta 0:00:00
Collecting idf-component-manager~=2.0.1
Downloading idf_component_manager-2.0.4-py3-none-any.whl (151 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 151.3/151.3 kB 98.4 MB/s eta 0:00:00
Collecting esp-idf-kconfig<2.0.0,>=1.4.2
Downloading esp_idf_kconfig-1.5.0-py3-none-any.whl (44 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 44.9/44.9 kB 47.3 MB/s eta 0:00:00
Collecting cffi>=1.12
Downloading cffi-1.17.1-cp311-cp311-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (467 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 467.2/467.2 kB 63.1 MB/s eta 0:00:00
Collecting click
Downloading click-8.1.7-py3-none-any.whl (97 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 97.9/97.9 kB 90.2 MB/s eta 0:00:00
Collecting colorama
Downloading colorama-0.4.6-py2.py3-none-any.whl (25 kB)
Collecting pyyaml
Downloading PyYAML-6.0.2-cp311-cp311-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (762 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 763.0/763.0 kB 69.6 MB/s eta 0:00:00
Collecting requests
Downloading requests-2.32.3-py3-none-any.whl (64 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 64.9/64.9 kB 111.8 MB/s eta 0:00:00
Collecting requests-file
Downloading requests_file-2.1.0-py2.py3-none-any.whl (4.2 kB)
Collecting requests-toolbelt
Downloading requests_toolbelt-1.0.0-py2.py3-none-any.whl (54 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 54.5/54.5 kB 88.0 MB/s eta 0:00:00
Collecting tqdm
Downloading tqdm-4.67.1-py3-none-any.whl (78 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 78.5/78.5 kB 152.4 MB/s eta 0:00:00
Collecting jsonref
Downloading jsonref-1.1.0-py3-none-any.whl (9.4 kB)
Collecting pydantic
Downloading pydantic-2.10.4-py3-none-any.whl (431 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 431.8/431.8 kB 73.9 MB/s eta 0:00:00
Collecting pydantic-core
Downloading pydantic_core-2.27.2-cp311-cp311-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (2.0 MB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.0/2.0 MB 50.9 MB/s eta 0:00:00
Collecting pydantic-settings
Downloading pydantic_settings-2.7.0-py3-none-any.whl (29 kB)
Collecting typing-extensions
Downloading typing_extensions-4.12.2-py3-none-any.whl (37 kB)
Collecting pycparser
Downloading pycparser-2.22-py3-none-any.whl (117 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 117.6/117.6 kB 101.2 MB/s eta 0:00:00
Collecting annotated-types>=0.6.0
Downloading annotated_types-0.7.0-py3-none-any.whl (13 kB)
Collecting python-dotenv>=0.21.0
Downloading python_dotenv-1.0.1-py3-none-any.whl (19 kB)
Collecting charset-normalizer<4,>=2
Downloading charset_normalizer-3.4.0-cp311-cp311-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (142 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 142.6/142.6 kB 80.8 MB/s eta 0:00:00
Collecting idna<4,>=2.5
Downloading idna-3.10-py3-none-any.whl (70 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 70.4/70.4 kB 63.4 MB/s eta 0:00:00
Collecting certifi>=2017.4.17
Downloading certifi-2024.12.14-py3-none-any.whl (164 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 164.9/164.9 kB 88.3 MB/s eta 0:00:00
Installing collected packages: wheel, urllib3, typing-extensions, tqdm, pyyaml, python-dotenv, pyparsing, pycparser, kconfiglib, jsonref, idna, future, colorama, click, charset-normalizer, certifi, annotated-types, requests, pydantic-core, esp-idf-kconfig, cffi, requests-toolbelt, requests-file, pydantic, cryptography, pydantic-settings, idf-component-manager
Successfully installed annotated-types-0.7.0 certifi-2024.12.14 cffi-1.17.1 charset-normalizer-3.4.0 click-8.1.7 colorama-0.4.6 cryptography-41.0.7 esp-idf-kconfig-1.5.0 future-1.0.0 idf-component-manager-2.0.4 idna-3.10 jsonref-1.1.0 kconfiglib-14.1.0 pycparser-2.22 pydantic-2.10.4 pydantic-core-2.27.2 pydantic-settings-2.7.0 pyparsing-3.2.0 python-dotenv-1.0.1 pyyaml-6.0.2 requests-2.32.3 requests-file-2.1.0 requests-toolbelt-1.0.0 tqdm-4.67.1 typing-extensions-4.12.2 urllib3-1.26.20 wheel-0.45.1
Reading CMake configuration…
Generating assembly for certificate bundle…
Warning! Flash memory size mismatch detected. Expected 4MB, found 2MB!
Please select a proper value in your sdkconfig.defaults or via the menuconfig target!
Dependency Graph
|– noise-c @ 0.1.6
|– ArduinoJson @ 6.18.5
|– Improv @ 1.2.4
Compiling .pioenvs/localdeck-fce9ac/src/esphome/components/api/api_connection.cpp.o
Compiling .pioenvs/localdeck-fce9ac/src/esphome/components/api/api_frame_helper.cpp.o
Compiling .pioenvs/localdeck-fce9ac/src/esphome/components/api/api_pb2.cpp.o
Compiling .pioenvs/localdeck-fce9ac/src/esphome/components/api/api_pb2_service.cpp.o
riscv32-esp-elf-g++: fatal error: Killed signal terminated program cc1plus
compilation terminated.
*** [.pioenvs/localdeck-fce9ac/src/esphome/components/api/api_pb2.cpp.o] Error 1
riscv32-esp-elf-g++: fatal error: Killed signal terminated program cc1plus
compilation terminated.
*** [.pioenvs/localdeck-fce9ac/src/esphome/components/api/api_connection.cpp.o] Error 1
========================= [FAILED] Took 158.86 seconds =========================